DOS Point Enabler(s) Troubleshooting

If you have problem with specific card and your card is not listed below, please send an e-mail to technical support team. Please make sure to include all required information into your e-mail.

Common for all Enablers

1. Enabler fails on Dell Latitude X200
2. Enabler fails on Samsung X10 notebook
3. Enabler fails to recognize the card on Compaq Armada M300 notebook
4. Application hangs after entering a 12-bytes serial number and restart of computer
5. On every start of Enabler appears warning about serial number expiration
6. USB/ATA/Firewire Disk created using APSoft enabler cannot be read using BIOS support.
7. Cannot boot from USB/ATA/Firewire Disk created using APSoft enabler.
8. How to backup and restore to/from NTFS partition under Ghost 8.x

DOS Point Enabler for ATA Cards specific

1. Enabler fails to recognize ATA card on top slot of Toshiba notebooks
2. Enabler fails to recognize ATA card on Sony PCG-SRX77 notebook

DOS Point Enabler for Adaptec APA-1460 SCSI Adapter Specific

1. Enabler displays following messages: "Detected PC Card 'Adaptec, Inc, APA-1460 SCSI Host Adapter' in Socket x:x:x", "Error: No supported SCSI adapters found."
2. Adaptec SCSI Driver reports 'Not enough memory for all host adapters'

DOS Point Enabler for Adaptec APA-1480 SCSI CardBus Adapter Specific

1. Adaptec SCSI Driver seems to hang starting on HP Omnibook 6200
2. Adaptec SCSI Driver unable to find SCSI adapter or hangs on the start.
3. Adaptec SCSI Driver fails to start on Toshiba Satellite 1115-S103 with O2Micro OZ6933/711E1 CardBus Adapter
4. Enabler works when Card is inserted in socket 0, but doesn't work in socket 1.
5. Adaptec SCSI Driver reports 'Not enough memory for all host adapters'

CardBus USB 2.0 Enabler for DOS Specific

1. Enabler works when Card is inserted in socket 0, but doesn't work in socket 1.

CardBus FireWire (IEEE-1394) Enabler for DOS Specific

1. Enabler works when Card is inserted in socket 0, but doesn't work in socket 1.